200mm Magnesium Rod Mg Stick Magnesium Alloy Round Bar

• Customization: Available
• Application: Aviation, Electronics, Industrial, Chemical
• Standard: GB
• Model NO.: Mg
• Shape: Round
• Alloy: Alloy
• Secondary: Secondary
• Product Name: Magnesium Alloy Bar Rod
• Melting Point: 566 - 632°c.
• Technique: Cold Rolled /Hot Rolled
• Size: Diameter3-160*3000mm Length
• Density: 1.8g/cm3
• Transport Package: Carton / Wooden Box
• Trademark: DOME
• Origin: China
• HS Code: 81043000
• Production Capacity: 15000 Ton Per Year

Product Description

20mm magnesium rod Mg stick Magnesium bar Magnesium alloy round bar 

Application: Applied to Magnesium Alloy plates, strips, tubes, rods, profiles, wires and the alloy ingots and slabs used for them.

Standard: ASTM B90/B90M

Processing Technology: Extrusion,Casting.

Compared with conventional casting magnesium alloys, semi-continuous casting magnesium alloys are finer in the organization, more uniform on the ingredients, and more compact inside with higher strength and elongation.

At present, there are many magnesium alloy numbers, and the alloy series that have been applied in a large number of fields are Mg-Al series alloys, especially AZ91 magnesium alloy that shows stable process during casting, small burn loss, excellent mechanical properties and high corrosion resistance behavior under room temperature conditions. In deformed magnesium alloys, it is the Mg-Zn series alloys that have gained a large number of applications, and they show excellent age strengthening behavior during heat treatment. In this series, from the research related to the combined number ZM81, it shows more excellent mechanical properties than Mg-Al alloy.ZK series alloys are mainly Mg-Zn-Zr series magnesium alloys, which is one of the most applied deformed magnesium alloys, represented by ZK61 magnesium alloy, which after high temperature forming and cooling and artificial aging treatment, the tensile strength is more than 300MPa, has good plasticity and corrosion resistance, good machinability, can manufacture complex shape of large forgings.

Technology:

Model	chemical component(%)
Type	Mg	Al	Zn	Mn	Si	Fe	Cu
AX31B	residual	2.5-3.5	0.60-1.4	0.20-1.0	≤0.08	≤0.003	≤0.001
AZ61A		5.8-7.2	0.40-1.5	0.15-0.50	≤0.10	≤0.005	≤0.005
AZ80A		7.8-9.2	0.20-0.80	0.12-0.50	≤0.10	≤0.005	≤0.005
AZ91D		8.5-9.5	0.45-0.90	0.17-0.40	≤0.08	≤0.004	≤0.001